WeAct Studio RP2040

Vendor: WeAct
Features: Breadboard Friendly, SPI Flash, USB-C
Source on GitHub: rp2/WEACTSTUDIO
More info: Website

Installation instructions

Flashing via UF2 bootloader

To get the board in bootloader mode ready for the firmware update, execute machine.bootloader() at the MicroPython REPL. Alternatively, hold down the BOOTSEL button while pressing reset (NRST). The uf2 file below should then be copied to the USB mass storage device that appears. Once programming of the new firmware is complete the device will automatically reset and be ready for use.

Firmware

Nightly builds

v1.19.1-992-g38e7b842c (2023-03-23) .uf2
v1.19.1-991-g6c7624896 (2023-03-23) .uf2
v1.19.1-989-g31e7a0587 (2023-03-22) .uf2
v1.19.1-985-gb5ceb9d57 (2023-03-22) .uf2

Firmware (8 MiB Flash)

No releases are available for this board.

Firmware (2 MiB Flash)

No releases are available for this board.

Firmware (4 MiB Flash)

No releases are available for this board.