RP2040-Plus
Vendor: Waveshare
Features: Dual-core, Battery Charging, External Flash, USB-C
Source on GitHub: rp2/WAVESHARE_RP2040_PLUS
More info: Website
Installation instructions
Flashing via UF2 bootloader
To get the board in bootloader mode ready for the firmware update, execute
machine.bootloader() at the MicroPython REPL. Alternatively, hold
down the BOOTSEL button while plugging the board into USB. The uf2 file below
should then be copied to the USB mass storage device that appears. Once
programming of the new firmware is complete the device will automatically reset
and be ready for use.
Firmware
Preview builds
These are automatic builds of the development branch for the next release.
Firmware (16 MiB Flash)
No releases are available for this board.Preview builds
These are automatic builds of the development branch for the next release.